Benjamin Geskin

Samsung Galaxy Fold 2 battery capacity became known long before launch


Samsung Galaxy Fold 2 is expected to be officially released on August 5 along with the Galaxy Note 20, Note 20 Plus and the new Galaxy Z Flip. Rumors of the Galaxy Fold 2 report that the device will receive several improvements over last year’s original. Details of its external and internal devices were already seeping into the Web. Now that the device has passed the Chinese 3C certification, details about the battery have become known.

Benjamin geskin

According to the documentation, the Galaxy Fold 2 battery will have a maximum charging capacity of approximately 4,500 mAh. Like the previous model, the device will consist of two parts. Recall: the original Galaxy Fold came with a 2135 mAh EB-BF900ABU battery and a 2245 mAh EB-BF901ABU battery (total charging capacity is 4380 mAh).

Recent leaks have shown that the SM-F916 and SM-F917 are Galaxy Fold 2 code numbers. They lit up during 3C certification and showed that the new smartphone will receive a 2090 mAh EB-BF916ABY and 2275 mAh EB-BF197ABY batteries. (The total charging capacity is 4 365 mAh).

The original Galaxy Fold came with a 7.3-inch main display and a small 4.6-inch display on the outside cover. Rumors of a successor model show that the Galaxy Fold 2 will receive a larger 7.7-inch bendable display and a large 6.23-inch external screen. Both displays are reportedly using Infinity-O (that is, they differ in minimal frames around and perforation under the camera). It is also rumored that the main display supports a refresh rate of 120 Hz.

In addition to the model with a 512-GB drive, it is expected that the Galaxy Fold 2 will also be released in the version with 256 GB of memory. It is unlikely that there will be support for the digital pen S Pen. The main camera of the phone can receive a 12-megapixel conventional module, a 64-megapixel telephoto module and an ultra wide-angle 16-megapixel module. The output is expected in black and brown colors.

If you notice an error, select it with the mouse and press CTRL + ENTER.

Leave a Comment